Product Level 3
solid materials
hook tooth
Blade width 27 x 0.9 - 100 x 1.6 mm
SKALAR® X3000®
The powerful band saw blade for high strength materials
applications
-
Excellent cut rate with high alloy austenitic materials
-
Material remelted by electroslag, material from 1000 N/mm² tensile strength
-
Continuous operation in large sawmills
Benefits
-
High efficiency due to excellent cutting performance
-
Fewer blade changes due to increased blade life
-
Lower cutting forces and smoother running
Resources
-
Ground contour with specially adapted tooth pitch
-
Tooth edge made of X3000® cutting material with positive rake angle
-
Special set for optimal chip splitting
MATERIALS OVERVIEW
-
nickel-based alloys
-
Titanium / titanium alloys
-
Hardened steels (over 1000 N/mm² / 32 HRC)
-
Rust-proof and acid-resistant (austenitic) steels
-
Duplex and heat resistant steels
-
aluminum bronzes
dimensions
Tooth pitch in ZpZ
Milímetros | Polegadas | 2,5-3,4 | 1,8-2,5 | 1,4-1,8 | 1,2-1,6 | 1-1,4 | 0,7-1 |
|---|---|---|---|---|---|---|---|
27 x 0,90 | 1-1/16 x 0,035 | K | |||||
34 x 1,10 | 1-3/8 x 0,042 | K | K | ||||
41 x 1,30 | 1-5/8 x 0,050 | K | K | K | |||
54 x 1,30 | 2-1/8 x 0,050 | ||||||
54 x 1,60 | 2-1/8 x 0,063 | K | K | K | K | K | |
67 x 1,60 | 2-5/8 x 0,063 | K | K | K | K | K | |
80 x 1,60 | 3-1/8 x 0,063 | K | K | K | K | ||
100 x 1,60 | 4 x 0,063 | K | |||||
Comprimento de corte | milímetros | 100-220 | 180-350 | 300-600 | 400-700 | 500-1000 | 900-2000 |
Comprimento de corte | polegadas | 3,9-8,7 | 7.1-13.8 | 11,8-23,6 | 15,7-27,6 | 19,7-39,4 | 35,4-78,7 |
width x thickness
K = hook tooth